If you ride your bike regularly and want it performing its best, then we suggest booking in your bike for this level of work around 3-4 times a year at regular intervals, or a week or so prior to an anticipated ride.

•Wipe Down
• Tune gears
• Lube chain
• Brake alignment
• Frame wear check - We’ll visually inspect your bike for any damage, wear and tear and report accordingly
• Nut and bolt safety check - Tighten/re-torque and regrease all bolts and axles
• Headset check and reset accordingly
• Tyre pressure check and inflation
• Drivetrain wear check/chain check - report/replace accordingly
• Tyre wear and damage check - report/replace accordingly
• Brake pad and rotor check - report/replace accordingly

If it has been some time between servicing, a little more than a simple tune up may be needed. We suggest this level of work is completed 1-2 times a year to keep you bike running reliably, especially if you are about to embark on a multi-day cycling adventure.

All of Day tripper jobs plus…

• Tyre sealant check and top up (tyres still mounted)

• Drop out fork for a headset clean, regrease and reinstall

The additional tasks completed in this level of service should be done every 18-24 months. More frequently if you ride in wet and gritty conditions as moisture ingress is likely causing some unseen wear and tear to your cranks and wheels

All of Flashpacking jobs plus…

• Crank removal, clean, regrease and reinstall

• Wheel true F&R with a drop of lubricant per nipple

This level of service leaves no part untouched. It's basically like being handed back a new bike and you should treat yourself (and your bike) to this level of attention every 24-36 months. Or before a bucklist ride event where you need 100% certainty that your equipment is running as smooth, efficient and reliably as possible.

All of Bikepacker jobs plus…

• Tyre removal or new tyre installation with fresh doses of tubeless sealant (old sealant cleaned out if reusing used but good tyres), valves to be cleaned and dry sealant removed from threads. Or new valves installed. Fresh rim tape is installed if needed

• Removal and re-installation of bottom bracket and hub ratchet overhaul

•Bike bath

€5 - Shifter battery replacement for SRAM AXS - Price per shifter

€5 - Sundries - Lubricants, greases, cleaners, solvents etc. -  charge for every job

€10 - Brake pad installation - flat rate per end

€10 - Cable change - flat rate per cable (gear or brake)

€15 - Tape bars 

€15 - Wheels installation -  New wheels to existing bike (needs to be pre-arranged and not done on the spot.) 

€20 - Brake bleed - flat rate per end

€30 - Bottom bracket replacement

€25 - Fit supplied tyres to new or existing Curve wheels - Road and Gravel 700x25-700x45 (Includes 2 x 40-60ml sealant dose)

€35 - Wheel true and re-tensioning - flat rate per wheel (Spoke and nipple replacement is additional)

€30 - Fit supplied tyres to new or existing Curve wheels - Off-road 27.5 x 2.0-2.35 / 29 x 2.0 - 3.0 (Includes 2 x 80-100ml sealant dose)

€30 - Bike bath

€60 - Wheel build - flat rate per wheel

Contact us for pricing - Rohloff hub & gearbox servicing (incl Pinion)

Contact us for pricing - Metal frame repairs

€15 - Cardboard Bike Box (subject to availability)

€35 - Bike Packing (box not included)

€35 - Unbox + Build

€35 - New bike non-Curve Box Build

€25 - Airport transfer (One Way to or from Airport/CBD)

€25 - Airport luggage drop (we meet you at the airport with your luggage)

Other shuttle services are available, please contact us for pricing